Certificates 
ID card printers 
Appending labels 
Customer support link 
This terminal is designed for access control systems with fingerprint verification. It allows saving the fingerprint on a MIFARE card and its backward verification by putting on the finger. It works both on-line or off-line.
Terminal features
- microcontroller for terminal control, identification and communication
- module for fingerprint verification
- two switch relays
- four galvanically separated inputs
- backed up memory for data storage (RAM 128 kB or 512 kB)
- communication interface RS 485 or RS 232
- acoustic and optical signalization
Terminal is certified by National Security Authority for protecting secret informations to the leveltop secret (including). is registered under number T 01-0722/2005.
| Specifications | |
| Number of pixels | 128 x 126 |
| Verification method | pattern matching |
| False acceptance rate | less than 0,01 % |
| False rejection rate | less than 1.9 % |
| Verification time | less than 2 s |
| Scanning of contactless cards | MIFARE |
| Scanning range with inner antenna | up to 5 cm |
| Operation cover | IP 40 |
| Storage temperature | 0 - +60 C |
| Power supply | 12 V / 0,4 A |
| Dimensions | 205 x 100 x 25 ( V x Š x H ) |
| Operation time after power failure | source dependent |
| Time of data backup | min. 8000 hours |
| Memory capacity | up to 10000 records ( 128 kB ) |
| Data interface | RS485, RS232 |
| Inputs | 4x galvanically separated |
| Outputs | 2 switching relays |
| Disturb resistance level | IEC801-2, MIL-STD461 |
| Terminal penetrability | 600 persons / 15 min. |
| Card scanning control | acoustic and optical |
