Certificates 
ID card printers 
Appending labels 
Customer support link 
This reader is used to connect to the WBox_R control unit or to access systems of other manufacturers with the standard WIEGAND interface.
|
Versions of the SBox reader |
 |
||
|
WIST02A2.XX |
|||
| .02 | SBox reader with a keyboard | ||
| .04 | SBox Legic Advant reader | ||
| .05 | SBox Legic Advant reader with a keyboard | ||
|
Technical parameters |
|
| Dimensions | 100 mm x 120 mm x 20 mm |
| Weight |
250 g |
| Voltage/Power supply | 12 V DC +/- 10% |
| Max. consumption | 90 mA |
| RFID technology | EM Marin 125 kHz, HITAG1,HITAG2, MIFARE, LEGIC |
| Reading coverage | Approx 10 cm depending on technology |
| Communication interface | WIEGAND, I2C, RS232 - TTL level |
| Signalization | 2x LED, 1x Buzzer |
| Range of working temperatures | -25. +50 °C |
| IP coverage | IP 65 |
Running test and controls
After connecting to the power supply voltage the reader activates the green and red LED light and simultaneously turns on the buzzer for approximately 1 second. Afterwards all signalization features are brought into idle condition. After placing the ID card on the reader, a green LED flashes and at the same time the buzzer activates to signal reading the card. All signalization features can be controlled by an external LO signal from the host device.
Na stiahnutie:
